DallasWater Damage Cleanup (469) 856-7756Get a call back
  1. Home
  2. Guides
  3. The First 24 Hours After Water Damage
Guide

The First 24 Hours After Water Damage

Water damage restoration is won or lost in the first day, and most of what decides it happens before a crew arrives. The EPA says water-damaged materials need to be dried within 24 to 48 hours to prevent mold; the IICRC S500 standard says clean water degrades toward contaminated water with time and faster in warm conditions; and a Dallas house in July is warm. What you do between finding the water and the crew pulling up matters as much as what they do after.

This guide walks the first 24 hours in order for a DFW homeowner: stopping the water, staying safe, documenting for the insurer, what to move and what to leave, what not to touch depending on where the water came from, and how the crew will classify and dry it. It assumes a slab-on-grade house, because that's most of ours; if you're in a pier-and-beam house in old McKinney, Denton or Garland, the crawl space is part of every step.

Hour one: stop the water, kill the power, call

Find the shutoff. The Dallas Builders Association's guidance: most DFW homes have a valve at the city meter near the curb (you may need a meter key, and the lid pries up) and another closer to the house; newer homes often have one inside, in the utility room or garage. Turn it clockwise, then open a faucet to confirm the pressure drops. For a single fixture, the angle stop under the sink or behind the toilet is faster. If the water is coming from the attic, shut the house valve; you won't find the attic valve in time.

If water came through a ceiling, reached outlets, or got into the attic air handler, turn off the breakers for that area before you walk through it. Then make three calls: the restoration company, your insurer, and the plumber. The restoration call goes first because drying can't wait on the plumber's schedule, and the companies Dallas Water Damage Cleanup sends you will stabilize a leak temporarily. Tell the dispatcher the source, how long it's been running, how many rooms, and whether anyone in the house has asthma or a compromised immune system.

Hour two: document before you touch anything

TDI's instruction is to list and photograph or video damaged property before making repairs and to keep damaged items until the adjuster has seen them. Do it like an adjuster would: wide shots of each room showing the water and the waterline on the walls, close-ups of the source (the split hose, the failed fitting, the rusted tank), each piece of furniture and each box in the water, the underside of anything you lift, and the serial plates on appliances. Video while narrating the time and what you're seeing. Photograph the water meter reading.

Then start a written list: every damaged item, where it was, roughly what it cost and when you bought it. That's your contents claim, and it's far easier to write while things are still where the water left them. Keep the failed part when the plumber replaces it, and ask the plumber to describe in writing how it failed. Sudden failures are covered on Texas policies; gradual ones aren't; the part and the report are what make the distinction.

What to move, and what to leave

Move what's light and dry-able to a dry room: electronics, paper, photos, clothing, books, anything on the floor of a closet. Lift area rugs off wet carpet and get them outside to drain. Put aluminum foil or plastic lids under the legs of furniture you can't move, because wood legs stain carpet and wick water up into the piece. Open cabinet doors under sinks and pull the drawers of anything that got wet. Take cushions off upholstered furniture and stand them on edge.

Leave the carpet down; the crew will decide whether it's saved, and pulling it wrong ruins it. Leave the baseboards; they come off cleanly with the right tools. Don't run the central air if the ductwork or air handler got wet, and don't aim household fans at a sewage or floodwater area, which spreads it. Don't throw anything away yet, even what's obviously ruined: the adjuster needs to see it, and TDI says to keep it until they have.

  • Move: electronics, documents, photos, clothes, rugs, closet floors
  • Protect: foil or plastic under furniture legs, cushions on edge, cabinet doors open
  • Leave: carpet, baseboards, drywall, anything the crew will meter
  • Don't: run the HVAC if it got wet, fan a contaminated area, discard anything before the adjuster

What not to touch: Category 2 and 3 water

The IICRC S500 standard sorts water by contamination. Category 1 comes from a sanitary source: a supply line, a tub overflow, a toilet tank. Category 2 carries significant contamination and can make you sick on contact or ingestion: dishwasher and washing machine discharge, a toilet bowl overflow with urine, water seeping up from the ground. Category 3 is grossly contaminated and can carry disease: sewage from beyond the trap, floodwater from creeks, lakes and rain that has run over the ground, and wind-driven rain from a storm. Clean water degrades toward Category 2 and 3 with time, faster in warm rooms.

For Category 1, do everything above. For Category 2, wear gloves and shoes, keep kids and pets out, and don't salvage anything porous (rugs, cushions) without asking the crew. For Category 3, stop. Don't wade in it, don't try to extract it, don't run anything that moves air across it, and don't let anyone with a respiratory condition near it. Shut the water, photograph from the doorway, close the door, and wait for a crew in protective gear. The EPA's guidance is explicit that sewage-contaminated water calls for a professional.

Why drying must start today: the mold clock

The EPA's Brief Guide to Mold says it plainly: dry water-damaged areas and items within 24 to 48 hours to prevent mold growth, and mold may be hidden on the back side of drywall, wallpaper or paneling. Carpet pad, the paper face of drywall, MDF baseboards and the dust in a wall cavity are all food. In a Dallas summer with the attic at 120 degrees and the house at 78, the short end of that window is the one to plan on. The practical rule: if you can't have commercial drying equipment running inside 24 hours of the water, you're taking a mold risk, and if the water is Category 3 the clock is faster.

The numbers follow. Fixr's January 2025 guide prices clean-water extraction and drying at $3.75 to $4.25 per square foot; a mold remediation found later runs $10 to $30 per square foot in Fixr's August 2025 guide, as licensed work in Texas once it's 25 contiguous square feet. A one-room leak dried today is a few hundred dollars; the same room three days later is a different job.

What the crew does: categories, classes, and the dry log

An IICRC-certified crew works to the S500 standard, currently in its 2021 edition. They confirm the category from the source and the time elapsed. Then they assign a class, which the 2015 revision of the standard redefined as an estimate of how much of the room's total surface area (floor, walls, ceiling) is wet and how hard it will be to dry: Class 1 is a small share with little absorption, Class 2 is a significant share with water wicked up walls, Class 3 is the largest share, typically water from above with walls and ceiling saturated, and Class 4 is specialty drying of dense, low-permeance materials like hardwood, plaster and concrete that hold bound water. Category sets the safety and disposal plan; class sets the equipment.

Then extraction, removal of what can't be saved, air movers and dehumidifiers, and the daily log: moisture readings at marked points compared to an unaffected reference area in the house, until they match. Three to five days for a Class 2 clean-water room is typical. Ask for the log and the photos; they're what your adjuster will use, and what you'll want if a mold question comes up later.

Hour 24: where you should be

The water's off and the source is fixed or at least stopped. The power's safe. You've photographed and listed everything and kept the failed part. Your insurer has a claim number and your restoration company has given you a written mitigation scope and set equipment. You have a copy of the certificate of insurance and know which crew member's IICRC number to look up. You haven't signed an assignment of benefits or paid a deposit. And the house is loud with air movers, which is the sound of the mold clock being reset.

Questions

Questions people ask

How long does it take for mold to grow after water damage?

The EPA's window is 24 to 48 hours for materials to be dried before mold can start; visible colonies on drywall or wood typically appear within a week or two if it stays wet. In a warm DFW house, plan on the short end. That's why extraction and commercial drying on day one is the whole strategy.

Should I turn off the electricity after a water leak?

If water came through a ceiling, reached outlets or switches, or got into the attic air handler, yes, turn off the breakers for that area before you walk through. For a floor-level leak with no wet outlets you can leave power on, but keep cords out of the water and don't run the HVAC if it got wet. Let the crew tell you when to restore.

What should I do with wet carpet?

Leave it down and let the crew decide. Clean-water carpet caught inside a day is usually saved by lifting it, discarding the pad, and drying it in place. Carpet touched by sewage or floodwater is removed regardless. Pulling it up yourself usually tears it or breaks the seams, and that turns a save into a replacement.

Can I dry water damage myself with fans?

A small clean-water spill on tile, caught at once, yes. Anything that soaked carpet pad, reached drywall or came from above, no. Household fans don't move enough air to dry a wall cavity and you can't tell when it's dry without a meter. Half-dried walls behind fresh paint are where DFW mold claims come from.

What is Category 3 water?

Under the IICRC S500 standard, water that's grossly contaminated and can carry disease: sewage from beyond the trap, floodwater from creeks and lakes, rain that has run over the ground, and wind-driven rain from a storm. It can also be clean water that sat long enough to degrade. Porous materials it touched are removed, not dried, and the crew works in protective gear.

How do I document water damage for insurance?

Wide shots of each room with the waterline, close-ups of the source and the failed part, every damaged item, the meter reading, and narrated video with the time. Then a written list of contents with approximate values. Keep the failed part and get the plumber's written description of how it failed. Don't throw anything out until the adjuster has seen it.

Need a restoration company today? Call (469) 856-7756.

Dallas-Fort Worth only. A local restoration company from our network calls you back. No fee to homeowners.

Call now
Call (469) 856-7756