DallasWater Damage Cleanup (469) 856-7756Get a call back
  1. Home
  2. Services
  3. Water Damage Restoration Cost
Service

Water Damage Restoration Cost in Dallas

Water damage restoration cost in Dallas-Fort Worth comes down to four numbers: how many square feet got wet, which category of water it was, how long it sat, and how much has to be rebuilt afterward. Most residential jobs in the metro land between $1,200 and $5,000 for extraction and drying, with the rebuild priced separately. This page lays out the published ranges, dated and sourced, and shows how a crew turns them into the estimate you'll be handed.

Air movers and a dehumidifier on a kitchen leak
Air movers and a dehumidifier on a kitchen leak

One warning before the numbers. The cheapest water damage repair cost is the one you pay the same day. Every hour of delay widens the wet area and pushes clean water toward Category 2, and the EPA's 24 to 48 hour mold window turns a drying job into a licensed remediation. Shopping three quotes over a weekend costs more than any of the three.

What it runs in Dallas-Fort Worth
$1,200 to $5,000
per job

Typical DFW mitigation jobs run $1,200 to $5,000 at $3 to $7.50 per square foot by water category, with rebuild, mold and sewage priced separately (Fixr, January 31, 2025, source Bob Vila, May 2023, source Voda DFW, April 7, 2025, source.

Per square foot, by water category

The industry prices extraction and drying per square foot of affected floor area, with the rate set by the IICRC S500 water category. Fixr's January 2025 guide: Category 1 clean water $3.75 to $4.25, Category 2 gray water $4.10 to $6.50, Category 3 black water $7 to $7.50. Bob Vila's guide: $3 to $4, $4 to $6.50, $7 to $7.50. A Greater DFW restoration company's April 2025 page: $3 to $4, $4 to $6, $7 and up. The three agree, and the DFW figures sit at the lower end of national.

So a 200-square-foot bedroom with a clean supply-line leak is $750 to $850 to extract and dry; the same room after a sewer backup is $1,400 to $1,500, and that's before the carpet, pad and lower drywall that Category 3 water forces out. The category is set by the source and by time: clean water left over a hot weekend is billed as Category 2 because it is.

By class and by job size

Class is how much of the room's surfaces are wet and how hard they are to dry. Fixr's and Bob Vila's guides both price typical totals by class: Class 1 (a small area, little absorption) $150 to $400; Class 2 (a whole room, water wicked up walls) $500 to $1,000; Class 3 (water from above, walls and ceiling saturated) $1,000 to $3,000; Class 4 (hardwood, plaster, concrete holding bound water) $20,000 to $100,000. The DFW company's April 2025 page frames it by scope: minor single-room $500 to $1,500, multiple rooms or flooring $2,000 to $5,000, structural damage and mold over $5,000.

Fixr's national average is $3,000 with a range of $1,200 to $5,000; Bob Vila's is $3,455 with a range of $1,305 to $5,707. For a DFW slab house, the Class 4 end is hardwood over slab or a tile floor set in a mud bed, both of which hold water for weeks.

Drying versus rebuild

Everything above is mitigation. Rebuild is a second scope and often a second contractor. Fixr: drywall restoration $1.50 to $3 per square foot (typical repair $275 to $485), ceiling repair $325 to $1,100, bathroom $500 to $4,500, kitchen $1,750 to $8,000. Bob Vila: drywall $300 to $800, ceilings $350 to $1,250, floors $200 to $500, electrical $1,200 to $3,000, structural $1,500 to $10,000. A PuroClean Rockwall flooring guide for Dallas puts replacement flooring at $2 to $6 per square foot for carpet, $3 to $8 for luxury vinyl plank, $4 to $12 for tile and $6 to $12 for engineered hardwood installed.

The typical Dallas water loss, then: $1,500 to $3,000 to dry a couple of rooms, and $2,000 to $8,000 to put them back depending on the flooring. Ask for the two scopes as separate documents so you can see which one your insurer is disputing.

Fees that show up on the invoice on top of the per-square-foot rates:

  • Emergency service fee: $50 to $200 (Fixr); after-hours sewage surcharge $200 to $500 (ThePricer)
  • Rapid dispatch fee: $100 to $200 (Fixr)
  • Safety equipment surcharge on contaminated jobs: $200 minimum (Fixr)
  • Equipment rental billed per day per unit when drying runs long
  • Antimicrobial treatment on Category 2 and 3 jobs
  • Contents manipulation and pack-out when furniture has to be moved or stored
  • Disposal of contaminated materials by weight or by load

Related costs: mold, sewage, plumbing

Mold remediation, when a dry-out finds it: $1,500 to $9,000 for most homes at $10 to $30 per square foot as a stand-alone licensed job (Fixr, August 2025), or $500 to $3,000 as an add-on during a water job (Voda DFW, April 2025), with the independent licensed inspection $450 to $800. Sewage cleanup: $2,000 to $10,000 for most backups (Bob Vila, February 2024), at $7 to $15 per affected square foot (ThePricer, October 2026). The plumber's repair is always separate: Bob Vila puts restorative plumbing at $1,000 to $4,000 and labor at $75 to $130 an hour; a slab leak repair in a DFW house, with the tunnel or jackhammer work, is its own estimate.

What insurance pays, and what you pay

If the loss is sudden and accidental, a Texas homeowners policy pays the mitigation and the rebuild up to your limits, less your deductible. You pay the deductible, anything the adjuster scopes out, and any upgrade you choose (tile where there was carpet). Gradual leaks, seepage and flood from outside aren't covered, and in those cases the numbers above are the bill. Under Texas law the insurer has 15 business days to acknowledge the claim and 15 business days after it has your documents to accept or reject it, with a possible 45-day extension if it tells you why. Your first check may be actual cash value, with the rest paid when repairs are shown.

How to read an estimate

A real mitigation estimate lists the affected square footage per room, the water category, the number of air movers and dehumidifiers and the days they'll run, the materials being removed by type and quantity, antimicrobial treatment if any, and the fees. It should be itemized the way an adjuster reads it, usually in the Xactimate format insurers use. If a quote is one number on a business card, it isn't an estimate. The companies we send give you the itemized version before equipment is set and a separate rebuild scope after the dry log is complete.

Questions

Questions people ask

How much does water damage restoration cost per square foot?

About $3 to $4.25 per square foot for clean water, $4 to $6.50 for gray water, and $7 to $7.50 for sewage or outside floodwater, for extraction and drying. DFW companies quote at the lower end of those national ranges. Rebuild (drywall, flooring, paint) is priced separately and usually costs more than the drying.

Why is water damage restoration so expensive?

Because it's labor plus equipment plus time plus disposal, and because the invisible part is the big part. Drying a wall cavity takes three to five days of machines and a daily visit with a meter. What looks like a wet patch of carpet is often a wet pad, a wet bottom plate and the lower drywall of two rooms. The alternative, a mold remediation at $10 to $30 per square foot, is why it's worth it.

Does insurance cover the full cost of water damage restoration?

For a covered sudden loss, it pays the mitigation and rebuild up to your limits, less your deductible, and less anything the adjuster leaves out of the scope. You pay the deductible and any upgrades. Gradual leaks, seepage and outside flood aren't covered on Texas policies, and sewer backup usually needs an endorsement.

Is it cheaper to do water damage cleanup myself?

For a small clean-water spill on tile, yes. For anything that soaked carpet pad or drywall, no, because what you save on the dry-out you spend later on mold. Household fans and a store dehumidifier can't dry a wall cavity, and without a moisture meter you won't know it's still wet. Renting commercial air movers and a dehumidifier is an option for a small, clean, caught-immediately loss.

How much does it cost to fix a water-damaged ceiling?

The ceiling repair itself runs $325 to $1,250 in the published guides, plus the drying of the area at $3 to $6.50 per square foot and new insulation above it. A single bedroom ceiling leak caught early is typically under $2,500 all in; a ceiling that came down across a room with the floor below soaked is several times that.

Do restoration companies charge for an estimate?

Most don't charge for the initial inspection and estimate, and the companies we send don't. What you may pay for is the emergency call-out if they start work on the spot, which is what you want them to do. Be cautious of a free estimate from a company that wants you to sign an assignment of benefits before they'll write it.

Need a restoration company today? Call (469) 856-7756.

Dallas-Fort Worth only. A local restoration company from our network calls you back. No fee to homeowners.

Call now
Call (469) 856-7756